Customization: | Available |
---|---|
Phase: | Single Phase |
Type: | On-line |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
pure sine wave ups | 1 kva ups | 2 kva ups | 3 kva ups | ||
rated power | 800 W | 1600 W | 2400 W | ||
INPUT | |||||
Voltage Range (145-275vac) | Low Line Transfer | 160 VAC / 140 VAC / 120 VAC / 110 VAC ± 5 % or | |||
80 VAC / 70 VAC / 60 VAC / 50 VAC ± 5 % | |||||
(based on load percentage 100%-80%/80%-70%/70%-60%/60%-0) | |||||
LowLine Comeback | 175 VAC ± 5 % or 85 VAC ± 5 % | ||||
High Line Transfer | 300 VAC ± 5 % or 150 VAC ± 5 % | ||||
High Line | 290 VAC ± 5 VAC or 143 VAC ± 3 VAC | ||||
Comeback | |||||
Frequency Range | 46-54Hz | ||||
Phase | Single phase with neutral ground | ||||
Power Factor | ≥0.99 with pfc rectifier | ||||
OUTPUT | |||||
AC Voltage Regulation (Bat. Mode) | ±1% | ||||
Frequency Range | 47 ~ 53 Hz or 57 Hz ~ 63 Hz | ||||
(Synchronized Range) | |||||
50 Hz ± 0.25 Hz or 60 Hz ± 0.3 Hz | |||||
Frequency Range | |||||
(Bat. Mode) | |||||
Current Crest Ratio | 3:1 | ||||
Harmonic Distortion | <= 3 % THD (Linear Load) | <= 4 % THD (Linear Load) | |||
<= 6 % THD(Non-linear Load) | <= 7 % THD(Non-linear Load) | ||||
Transfer Time | AC to DC | Zero transfer time ups | |||
Inverter to Bypass | 2 ms (Typical) | ||||
Waveform(Bat. Mode) | Pure Sine Wave ups sine wave ups, online sinusodal ups | ||||
EFFICIENCY | |||||
To AC Mode | 85% | 90% | |||
To Battery Mode | 83% | ||||
BATTERY | |||||
Standard Model | Battery Type | 12 V / 7 AH | 12 V / 9 AH | 12 V / 7 AH | 12 V / 7 AH |
Numbers | 2 or 3 | 3 | 6 or 8 | 8 | |
Typical Recharge Time | 4 hours recover to 90% capacity | ||||
Charging Current (max.) | user settable 1amp, 2amp,4amp,6amp | ||||
Charging Voltage | 13.8vdc each cell ± 1% | ||||
Long-run Model | Battery Type/Numbers | SLA 36vdc or 96vdc external fixed | |||
Charging Current (max.) | 6.0 A | ||||
Charging Voltage | 13.8vdc each cell ± 1% | ||||
INDICATORS | |||||
LCD Panel | UPS status, Load percentage, Battery level, Input/Output voltage, Discharge timer, and Fault conditions | ||||
ALARM | |||||
Battery Mode | beeper beeps once every 4 seconds | ||||
Low Battery | beeper beeps once every 1 second | ||||
Overload | beeper beeps twice every 1 second | ||||
Fault | Continuously beeping | ||||
PHYSICAL | |||||
Size DXWXH (mm) | 400x145x220 | 460x192x348 | |||
OPERATING ENVIRONMENT | |||||
Humidity | 20-90 % RH @ 0- 40°C (non-condensing) | ||||
Noise Level | Less than 45dB @ 1 Meter | ||||
MANAGEMENT | |||||
Smart RS-232/ optional USB | Supports Windows®98/2000/2003/XP/Vista/2008,Windows®7,Linux,and MAC | ||||
optional intelligent slot & SNMP | Network monitor and power management tool/protocol | ||||